Leaking has to be one of the most frustrating issues that any vaper has to put up with. There could be several reasons why vape tanks leak, mainly poor assembling or usage. First things first: check if all components are screwed in tight. The coil needs to be screwed in and the seals or O-rings of the tank in place. Overfilling is also another major reason for leaking; always fill at the recommended level and avoid getting e-liquid in the central airflow tube. If your leak persists, try adjusting your vaping style-inhale more slowly and steadily to prevent excess liquid from building up and seeping out.

How to Handle Burnt Coils

The burnt coil is another frequent problem that can spoil the vape. It usually occurs when a coil is not properly primed or when the tank runs dry during vaping. To avoid this, allow a new coil to soak in the e-liquid for at least five to ten minutes before use. If your coil is burnt, change it right away to prevent inhaling foul fumes. Prolong the life of your coil by using e-liquids appropriate for your device, along with the correct VG/PG ratio, and try to refrain from chain vaping, which will overheat the coil.

Poor Flavor or Weak Hits

There are many reasons why flavor might taste bad or the vapor weak. These can be anything from a clogged coil to using e-liquids that are already outdated, to low battery power. First, check the coil of your vape; replace it when clogged or if it has been used for a while. Ensure fresh e-liquid and store it properly; heat and sunlight degrade its quality. Make sure that your device battery is fully charged and in good working condition. Changing your wattage settings to the recommended setting for your coil can also help to enhance flavor and vapor. 

Preventing Dry Hits

Dry hits are unpleasant and can occur when the wick inside the coil isn’t saturated with enough e-liquid. To avoid this, always ensure your tank has enough juice before vaping. If you’re using a rebuildable atomizer, make sure the wick is properly placed and thoroughly saturated. Another tip is to avoid chain vaping, as rapid consecutive puffs can deplete the wick’s liquid faster than it can replenish. If dry hits persist, try switching to e-liquids containing more PG, which wicks better in some configurations.

Preventing Spitback

To address this, ensure your coil is installed correctly and that you’re not overfilling the tank. Vaping at the correct wattage for your coil can prevent excess liquid from being vaporized too quickly. Another solution involves the use of a drip tip or screen to catch those stray droplets before they reach your lips. If the spitback persists, try to replace the coil, as an old or faulty coil can make the problem worse. How to Fix Battery and Connection Problems

Addressing Battery and Connection Issues

If your device refuses to turn on, check its battery for visible damage and whether it is properly charged. If the device turns on without firing, clean the points of connection between the battery and the tank. Sometimes, dirt or e-liquid residue is obstructing that connection. Otherwise, replace either the battery or the tank, as one might be bad. Such problems can be avoided if one keeps their device well.

Regular maintenance and proper usage are key to avoiding common vape problems. Always follow the manufacturer's instructions for your device, including cleaning schedules and recommended settings. Storing your device upright and in a safe, dry location can also prevent many issues, such as leaks and battery damage. Taking the time to care for your vape means a smoother, more reliable experience.